Futaba G152 Bedienungsanleitung PDF herunterladen

The FP-G132/G152 is a single axis rate gyro designed to

stabilize aircrafts. Like

full

size

aircrafts, stabilisation

ac-

complished by detecting angular acceleration with the rate

gyro. Detected motion information is fed to the control

amplifier, which then sends a counteraction signal to the

appropriate control surface.

•The

FP-G152

for Futaba

and

Series

(1520

us,

neutral) digital proportional radio control sets.

•The

FP-G132

for

Futaba E, F, G,

and

Series

digital

proportional radio control sets.

•Voltage regulated gyro motor supply maintains constant

motor speed and allows consistent gyro performance. The

voltage regulator is effective only when used with an ex-

ternal 6V. (five cell Nicad battery).

•Direction of correcting mix can be switched at the control

amplifier (internal reverse amp switch).

•Centering of the channel being stabilized can be adjusted

by a neutral trimmer built into the control amplifier.

•A very sensitive magnetic motion sensor with excellent

voltage characteristics, linear sensitivity, high speed

response is used. This results in superior neutral char-

acteristics. Such characteristics make it ideal for use in the

rudder channel of a model helicopter or in the aileron/

elevator channel of a model aircraft.

•Large 2mm diameter gyro motor shaft for long life and

strength.

•The gyro can be bypassed without affecting normal oper-

ation

turning

the

gyro power switch

"off".

•Mount

the gyro

with

grommets and

screws

use

two-

sided foam tape.

• Gyro

output ("sensitivity")

can

switched

one

two

preset outputs at the transmitter (use the retract switch if

possible, or any avail, channels).

1 2 3 4

Inhaltsverzeichnis

Seite 1

The FP-G132/G152 is a single axis rate gyro designed tostabilize aircrafts. Like full size aircrafts, stabilisation is ac-complished by detecting angu

Seite 2 - CONNECTIONS

RATEINGSPower supply voltageCurrent drainDimensions and weight4.8V shared with receiver (6V for external supply)Motor: 100mA, Amplifier: 20mA (at 4.8V

Seite 3 - INSTALLING THE CONTROL BOX

RATE GYRO INSTALLATIONNOTE: Be sure gyro is mounted as shown; for stabilization of the correct axis.Helicopter - For rudder useConnect connector (A) t

Seite 4 - OUTPUT ADJUSTMENT

OUTPUT ADJUSTMENT•When using the switchable gyro output sensitivity feature,connect connector (B) to the retract channel if possible.However, a propor

Verwandte Modelle: G132

Kommentare zu diesen Handbüchern

Keine Kommentare

Futaba G152 Bedienungsanleitung

Stöbern Sie online oder laden Sie Bedienungsanleitung nach Messgeräte Futaba G152 herunter. Futaba G152 User Manual Benutzerhandbuch

Inhaltsverzeichnis

Verwandte Modelle: G132

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Messgeräte Futaba G152