Futaba 4VF Bedienungsanleitung PDF herunterladen (Seite 18)

1616

USING OTHER FUNCTIONS

STICK LEVER SPRING TENSION ADJUSTMENT

The stick spring strength can be adjusted.

The operating feel of the aileron, elevator, and rudder sticks can be individually adjusted.

1 Remove the four transmitter

rear case screws and remove the

rear case.

2 Adjust the spring strength by

turning the screw of the channel

you want to adjust.

3 Close the rear case and tighten

the four screws.

Elevator

(Mode 1)

Elevator

(Mode 2)

Rudder

Aileron

(PC board)

TRAINER FUNCTION

The trainer function is a very effective way for training students. To use it, the special

trainer cord (sold separately) is necessary.

The special trainer cord can be connected to SKYSPORT4, FF5, SKYSPORT6, 7U series,

8U series, and PCM1024Z series transmitters.

OPERATING

INSTRUCTIONS

*Connect the student and instruc-

tor transmitters with the trainer

cord.

Instructor side:

Turn on the power switch and extend the

antenna to its full length.

When the trainer switch is not pressed,

the instructor has control.

When the trainer switch is pressed, con-

trol is transferred to the student.

Student side:

Never turn on the power switch.

WARNING

Never turn on the student trans-

mitter power switch.

Turning on the power switch will cause

interference and a crash.

Set the student and instructor

transmitters to the same settings.

For example, if the direction of operation

is reversed, control will be lost and the

plane will crash.

The opposite side can only use an

FM (PPM) type transmitter.

If the modulation method is different, con-

trol is impossible.

1 2 ... 13 14 15 16 17 18 19 20 21 22 23

Kommentare zu diesen Handbüchern

Keine Kommentare

Futaba 4VF Bedienungsanleitung Seite 18

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kommunikationszubehör Futaba 4VF