Futaba GY501 Bedienungsanleitung PDF herunterladen (Seite 40)

DATA SETTING

Gain Tracking

Initial value: +0%

Adjusts left and right tail stopping. It is used at 0% as standard, but

use this adjustment when pirouette stopping cannot be adjusted using

the CDI parameter. For example, when pirouette stopping resembles

hunting, or right turn pirouette stopping drifts, shift Trk in the +

direction. In the reverse case, shift Trk in the - direction.

If Trk is large, a left and right pirouette speed difference will be

produced. Therefore, adjust gain tracking with the smallest possible

value. The setting range is -20% to +20%.

Servo Frame Rate

Initial value: NOR

Sets the servo output frame rate. The transmitter frame rate (Nor) or

1/2 the transmitter frame rate (High) can be set. Normally, use at

"Nor".

1 2 ... 35 36 37 38 39 40 41 42 43 44 45

Keine Kommentare

Futaba GY501 Bedienungsanleitung Seite 40