Futaba 6XHS Bedienungsanleitung PDF herunterladen (Seite 52)

ELICOPTER

ETUP

NSTRUCTIONS

The following example shows how the T6XAs/XHs may be programmed for a helicopter model.

Your model’s settings will be dependent on the setup and linkages. Ask an experienced pilot for

assistance.

Receiver

Switch

Harness

To Battery

Charging

Jack

Aileron Servo

(CH1)

Optional

Gyro

System

Elevator Servo

(CH2)

Throttle Servo

(CH3)

Rudder Servo

(CH4)

Pitch Servo

(CH6)

Dual Conversion

FP-R127DF

7CHANNEL

RECIVER

1. Memory Selection

Use the model select function [MODL] to

select an available model memory.

Choose Helicopter settings from within

the parameter menu.

CAUTION: if you select a new type of

model, you’ll lose all the data already in the

model memory.

2. Hook up controls.

In the helicopter, install each servo and

hook up the aileron, elevator, throttle, rudder,

and pitch pushrods to the servos in accordance

with the model’s instructions or plans.

3. Plug In Servos (see figure

above).

CH1................Aileron

CH2................Elevator

CH3................Throttle

CH4................Rudder

CH5................spare (or Gyro Sensitivity)

CH6................Pitch

4. Set Servo Throw Direction

– 47 –

Check the proper direction of throw for

each servo. Use the reversing function [

REV]

1 2 ... 47 48 49 50 51 52 53 54 55 56 57 ... 63 64

Kommentare zu diesen Handbüchern

Keine Kommentare

Futaba 6XHS Bedienungsanleitung Seite 52

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Kommunikationszubehör Futaba 6XHS