Futaba 6XHS Bedienungsanleitung PDF herunterladen (Seite 47)

3. If you are sure you wish to choose a new model type, press both DATA INPUT keys

simultaneously again. This resets the model type and erases the memory. The model type

letters will stop flashing to indicate the changed model type.

MOD

—

Modulation Select (PARA sub-function)

The Modulation menu is used to select the PCM or PPM mode of transmission, to match the

receiver being used (PCM = Pulse Code Modulation, and PPM = Pulse Position Modulation,

also called FM for Frequency Modulation). The T6XA/XH system ships with a PPM receiver,

but if you also will be using a PCM receiver, you should select the PCM mode for that receiver.

Note that you have to turn your transmitter on and off before a modulation change becomes

effective.

Changing your transmitter’s modulation

1. Press on the MODE buttons until the MOD window appears.

2. To select PCM modulation, press the (+) DATA INPUT key. The letter C is

displayed. To select PPM modulation, press the (–) DATA INPUT key.

The letter P is displayed.

3. To get the transmitter to operate in the new mode, switch transmitter power off and then on.

The small indicator will indicate the new mode, either PPM or PCM.

COPY — Copy Model

The

COPY

function is used to copy the current model data into another model memory.

This function is handy to use to start a new model that’s similar to one you have already

programmed, and is also handy for copying the current model data into another model memory

as a backup.

Copying from one model memory to another

1. Press on the MODE buttons until the COPY window appears.

2. The source model memory (the memory that will be duplicated)

is the current one. To select your destination model number,

press the (+) or (–) DATA INPUT keys. The selected destination memory number will flash on

and off, and a small triangle will appear under it.

Source

Destination

3. Press the CURSOR key, and the word SET? appears blinking on and off in the display. If you

do not wish to reset the data, press the CURSOR key or a MODE key or return to the regular

window.

– 42 –

1 2 ... 42 43 44 45 46 47 48 49 50 51 52 ... 63 64

Keine Kommentare

Futaba 6XHS Bedienungsanleitung Seite 47